news
Contact

MAANSHAN RUIKE MACHINERY TRADING CO.,LTD 

ADD: BOWANG DISTRICT ,MAANSHAN CITY, ANHUI PROVINCE,CHINA . 

CONTACT PERSON: CARTER CHANG 

PHONE/WHATSAPP:0086 13225521286  

TEL:0086 13225521286

SKYPE ID : carter3422  

MAIL: 13225521286@163.com

detailed

Operating Principle of Hydraulic Plate Shearing Machine

time:2014-12-20 17:06:48 | shot:times

Plate shearing machine is often used for shearing the plate blank on the linear edge. The shearing process should ensure the linearity and parallelism requirement of the shearing surface of the sheared plate and greatly reduce the torsion of the plate, so as to obtain high-quality workpieces.

1. Operating principle of CNC plate shearing machine. Operating principle of plate shearing machine: The upper blade 1 is fixed on a tool rest 2, the lower blade 3 is fixed on a lower bed surface, the bed surface is equipped with a support ball 5 to facilitate feed-in movement of plate material 6, a rear baffle 7 is used for positioning the plate material, and the position is adjusted by a positioning pin 8. A hydraulic pressing cylinder 9 is used for pressing the plate material to prevent it from turning during shearing. Grid 10 is a safety device to prevent industrial accidents.

(1) Adjusting a front baffle

Put the rear baffle near the lower knife edge, put the template near the rear baffle, put the front baffle near the template and fix. Loosen the rear baffle, remove the template, load the plate material and shear.

(2) Adjusting the rear baffle

Make the template align at the lower knife edge, put the rear baffle near the template and fix, remove the template, load the plate material and shear.

next:Safety Operating Instructions of Bending Machine
Call me!