news
Contact

MAANSHAN RUIKE MACHINERY TRADING CO.,LTD 

ADD: BOWANG DISTRICT ,MAANSHAN CITY, ANHUI PROVINCE,CHINA . 

CONTACT PERSON: CARTER CHANG 

PHONE/WHATSAPP:0086 13225521286  

TEL:0086 13225521286

SKYPE ID : carter3422  

MAIL: 13225521286@163.com

detailed

Safety Operating Instructions of Bending Machine

time:2014-12-20 17:12:21 | shot:times

1. Check if the parts of the machine are normal or not, and ensure that the tightening screw (nut) cannot loosen. The brake should be normal and reliable.

2. Adjust the barrel distance in strict accordance with plate thickness, and do not excess load or roll or press workpieces beyond mechanical performance provisions.

II. Precautions during Operation

1. Operate after the workpiece is put stably and straightly, clarify the signal and assign a person to command

2. Do not put your hands on the steel plate bent by the machine or check with a sample plate, and check the roundness with the sample plate after the machine stops.

3. Reserve certain margin when the machine rolls to the end of the steel plate while rolling an unround workpiece to avoid hurting people.

4. Stand clear of the workpiece, and do not find the roundness on the rolled barrel when the machine operates.

5. Descend the roller a bit and roll repeatedly when the machine rolls a thicker barrel with larger diameter or a workpiece with larger material strength.

6. Put the machine in the middle of the roller when rolling a narrow barrel

7. After the workpiece enters the roller, prevent the hand or clothes from being rolled in the roller

III. Precautions during Halt

1. If the machine makes an abnormal sound, immediately stop to check, adjust and repair it

2. Break the switch of the machine and cut off the power

3. Put the workpiece in the designated site after the stop

prev:Operating Principle of Hydraulic Plate Shearing Machine
Call me!