news
Contact

MAANSHAN RUIKE MACHINERY TRADING CO.,LTD 

ADD: BOWANG DISTRICT ,MAANSHAN CITY, ANHUI PROVINCE,CHINA . 

CONTACT PERSON: CARTER CHANG 

PHONE/WHATSAPP:0086 13225521286  

TEL:0086 13225521286

SKYPE ID : carter3422  

MAIL: 13225521286@163.com

detailed

Maintenance Regulations of Plate Bending Machine

time:2014-12-20 17:13:40 | shot:times
The plate bending machine is used for bending plates, its service life is related to the benefit of manufacturers, and only correct use and daily maintenance can achieve the aims of durability, energy conservation and high efficiency. Its maintenance procedures are as follows: 1. Lubricate the oil cups and manual lubricating points according to the lubrication sketch map of the machine. 2. Roll the plates according to parameters regulated by the plate bending machine, rolling thickness 20mm, maximum length 2,500mm, yield limit of rolling material: less than 250Mpa. 3. After switching on, make the lower roller move in positive and negative directions and the upper roller go up and down, and check if motions are normal. 4. Strictly operate according to rolling processing procedure and operating method, and pay more attention to safe operation of the machine when the upper roller lifts to the limit position. 5. After the main drive stops, conduct the rise and fall of the upper roller, dump resetting of turning bearing and tilting of the upper roller. 6. During the operation, immediately stop the machine and check when irregular noise, impact and other abnormal phenomenon occur. 7. The personnel 
prev:Knowledge of Plate Shearing Machine and Bending Machine
next:MTA VIETNAM 2013 Machine tool Fair.Booth No.:AH6-02 on July2-5
Call me!